As an owner of a Bissell vacuum cleaner, I know how frustrating it can be when the vacuum doesn’t turn on.
It’s annoying if you’re in the middle of cleaning and suddenly, your vacuum stops working.
But don’t worry; here are some simple troubleshooting steps you can take to get your vacuum running again.
In this article, I’ll explore why your Bissell vacuum is not turning on and how you can fix it.
Let’s get started!
Why does your Bissell vacuum not turn on?
The Bissell vacuum may not be turning on due to various reasons. Common causes may be an empty or faulty battery.
A defective power cord, loose wires, an overheated motor, or a malfunctioning on/off switch.
In order to solve the issue, you should visually inspect the vacuum to check for damage or wear-and-tear on the power cord or any signs of damage.
If there is any damage you should repair it or if it is necessary to replace it with a new one.
1. Power issue
If your Bissell vacuum isn’t turning on, it may be because of improper power. You should ensure that the vacuum is getting enough power to work.
If it does not receive power, you should check the power outlet to ensure it is not faulty or damaged.
If it is damaged, you should need to replace it with a new one to ensure the optimal performance of your vacuum.
2. Faulty power cable
If your Bissell vacuum is not turning on, it may be due to a faulty power cord. In order to solve the issue, you should Inspect the power cable for signs of wear or damage.
If there is no damage to the cable, you should replace the cable with a new one to ensure it is not faulty.
Also, ensure the plug is inserted firmly into an outlet with proper voltage. If there are no power cord issues, you should check other components for malfunction.
3. Faulty motor
The motor provides the power to start the vacuum; if it becomes overheated or faulty, it will not be able to work properly.
It can be caused by several causes, such as prolonged use, overloading of power, or even an electrical surge.
In order to test if a motor is faulty, unplug the vacuum and inspect the motor for any signs of damage or wear.
If there are any signs of damage, such as burnt-out wires or cracks in the housing, you should replace the motor with a new one.
4. Malfunctioned switch
A switch delivers the power when it’s turned on. If it becomes malfunctioned or clogged, it will not work properly.
A build-up of dust and debris, short-circuit, or other issues can malfunction the switch.
In order to fix the issue, you should clean the switch carefully with compressed air.
If it does not solve the issue, you may need to replace the switch with a new one.
Before attempting any repairs, ensure you have all the necessary tools and safety equipment to do so properly.
5. Overheated
If the vacuum is used frequently and for an extended period of time, it can become overheated. It can cause the vacuum to stop working and not turn on.
Symptoms of an overheated vacuum are a burning smell from the motor, loud noise when initially turning on the device, or smoke coming out of it.
In order to prevent the vacuums from overheating, you should take periodic breaks while vacuuming and avoid using attachments that increase suction power.
You should also reduce suction power to reduce heat buildup when using attachments.
Also, regularly check for blockages in the filter or hose to ensure airflow is not restricted and that heat does not build up inside the motor housing.
6. Clogged filter
If the filter becomes clogged with dirt, dust, or debris, it can prevent the vacuum from functioning.
You should inspect the filters to ensure that they are not clogged; if they are, you should need to unclog them.
In order to unclog the filter, turn off and unplug the vacuum from the power source, then remove the filter from the vacuum.
Now inspect it for visible obstructions and use a cloth to gently wipe away any build-up of dust or debris.
Once you’ve removed all visible obstructions, blow out the excess dust with compressed air to ensure all the debris is removed.
If necessary, rinse the filter in warm water and allow it to dry before placing it back into your vacuum cleaner.
7. Clogged hose
If your vacuum is not turning on, it could be due to a clogged hose. It may happen if you are regularly vacuuming up dirt and debris.
In order to unclog the hose, disconnect the hose from the vacuum. Then use a flashlight to check for any blockages inside the hose.
If there is any obstruction, use pliers or tweezers to pick them out. Be sure to look further down inside the hose to ensure all of the debris has been removed.
If it doesn’t fix the issue, check if there is a clog in other parts of the vacuum, or if something else may be causing it.
8. Customer support
If you still need help, you should contact Bissell customer support for further instructions.
Customer support has qualified and expert technicians; they can provide you with another solution for it.
FAQ
Why is my Bissell vacuum not turning on?
If your Bissell vacuum is not turning on, it may be due to various reasons. The cord may be damaged, or the outlet you are using is not working properly.
There could be an issue with the motor or belt in the vacuum that needs further inspection and repair.
You should check all the components of your vacuum cleaner; if there is any issue with your vacuum, replace it with a new one.
How do you turn on a Bissell vacuum?
To turn on a Bissell vacuum, press the power button on the top of the device. Then use the dials and buttons to select your desired level of suction power.
Ensure all attachments are securely connected before turning it on and vacuuming. Finally, press the wand handle release lever to detach or attach your chosen tools.
Why is my Bissell Little Green not turning on?
There could be several reasons why your Bissell Little Green isn’t turning on. In order to resolve the issue, check if the power cord is securely connected to the unit and plugged into a working outlet.
If so, try pressing the reset button or switch on the machine. You should also ensure that all water has been emptied inside your Bissell Little Green before turning it on again.
Why is my carpet cleaner not turning on?
There could be several reasons why your carpet cleaner is not turning on. If the power cord is plugged in and there is power to the outlet, it could be an issue with the switch or motor.
If the switch isn’t responding when you press it, then it could need to be replaced. Similarly, if the motor isn’t working, it would need to be serviced by a professional or replaced.
Bissell vacuum won’t stay on?
If your Bissell vacuum won’t stay on, it could be caused by a few issues, such as a faulty power cord or motor.
To solve the issue, you should ensure that the power cord is securely plugged in at both ends and that all electrical connections are functioning properly.
If it doesn’t solve the problem, the vacuum might have an issue with its internal wiring or motor.
You should try resetting it by unplugging it for several minutes and then plugging it back in again.
You may love to read!
Why Is My Bissell Vacuum Brush Not Spinning
Bissell vacuum spitting out dirt
Wrapping Up
These are possible solutions if your Bissell vacuum is not turning on. You should try these solutions to fix the issue.
- Power issue
- Faulty power cable
- Faulty motor
- Malfunctioned switch
- Overheated
- Clogged filter
- Clogged hose
Now I’d like to hear from you!
Which method are you using from this article? Do you still need further information about Why your Bissell vacuum is not turning on?
Let me know in the comment.
Sources:
