I was cleaning my living room when I noticed that the power button on my Bissell vacuum cleaner had become stuck.
No matter how hard I pressed it, nothing happened. With a sinking feeling, I decided to research it and find out how I could fix it.
In this article, we will explore why your Bissell vacuum power button is stuck and how you can fix it.
Let’s get started!
Why is your Bissell vacuum power button stuck?
If your Bissell vacuum power button is stuck, it may be due to a buildup of dirt or debris preventing the switch from moving freely.
It could also be caused by a faulty internal switch or a broken spring which is not allowing the power button to move.
In order to solve the issue, cleaning out dust and debris that have stuck in the power button.
Check for damage
The power button can become stuck over time due to wear and tear on the switch. You should check for damage.
Look closely to see if the button may be damaged or broken; in that case, you should need to be replaced.
If it does not solve the issue, then another factor may cause it.
Clogged button
A clogged button can cause the button to stick and become difficult to press. In order to resolve the issue.
You should unclog the button by turning it off and unplug the vacuum from its power source.
Then inspect the area around the power button for any debris or foreign objects blocking it. If there is any obstruction, carefully remove it using tweezers or a similar tool. Now try to press the power button to see if it works properly.
If it doesn’t work, it may be an issue with the internal switch wiring, such as dirt buildup or corrosion causing poor contact between the wires.
In this case, you must open the vacuum cleaner and inspect the wiring for visible damage.
If any of the issues are found within these components, you should fix or replace them before using your vacuum again.
Age of button
The Bissell vacuum power button may become stuck due to wear and tear over time. It is especially true if the vacuum is used frequently or has been in the same home for several years.
It is not uncommon for buttons to become stuck on vacuums that are 10 or more years old.
The plastic casing surrounding the power button can also easily crack or break, making it difficult for the button to stay in place and function properly.
In many cases, replacing the power button can be a more cost-effective solution than repairing that one.
Manufacturer fault
Bissell vacuum power button stuck is a common problem; often, it’s caused by a manufacturer’s fault.
A defective manufacturing process jams the power button or gets stuck in place. In some cases, the power button may be broken.
If your Bissell vacuum power button is stuck, there are a few steps you can take to try and fix the issue.
The first step is to carefully inspect the power button and its surrounding components. Look for any visible signs of wear or damage causing the issue.
If no apparent damage is detected, you should press down firmly on the power button a few times to dislodge it from its stuck position.
You should also use a thin flathead screwdriver to gently pry up the power button if it does not respond to pressure.
If these methods do not work In this case, the best option would be to take it to a professional repair shop.
FAQ
Where is the power button on the Bissell vacuum?
The power button on a Bissell vacuum is typically located near the top of the handle and can generally be identified by its bright red colour.
It may have a distinct shape that makes it easy to find. It also depends on the model of your Bissell vacuum.
If you still have trouble locating it, refer to your product manual or contact customer service for assistance.
Where is the power button on the Bissell Proheat?
The power button on the Bissell Proheat is located at the back of the device towards the top, just above the heater vents.
It should be easy to spot with a bright red or orange colour and labelled ‘power’.
Where is the reset button on a Bissell vacuum?
The reset button on a Bissell vacuum is usually located near the power switch. It may also be found near the filter or inside the dust cup compartment.
If you still need to contact the manufacturer of your device for further instructions.
How do you turn on a Bissell pet vacuum?
In order to turn on a Bissell pet vacuum, only press the power button located at the top of the handle.
If your vacuum has a two-step start process, after pressing the power button, then hold down both buttons on either side of the handle for five seconds to turn it on.
Bissell Vacuum Power Button Won’t Stay ON?
If your Bissell Vacuum cleaner’s power button won’t stay on, it could be due to various issues.
It could be due to the battery may be dead and needs to be replaced, or the switch is faulty and needs to be repaired.
In some cases, blockage in the hose or filter can cause the power button to shut off intermittently. If this is the case, you can try cleaning the hose and all parts of the vacuum cleaner to resolve the issue.
If none of these solutions solve your problem, then it is likely that an internal component, such as a wire or switch, is faulty and will need to be serviced by a professional technician.
Wrapping Up
These are the possible solutions if your Bissell vacuum power button is stuck. You should try these solutions to fix the issue.
- Check for damage
- Clogged button
- Age of button
- Manufacturer fault
Now I’d like to hear from you!
Which method are you using from this article? Do you still need further information about how to fix Bissell vacuum power button?
Let me know in the comment.
You may also love to read!
Why Is My Bissell Vacuum Brush Not Spinning
