I recently had a frustrating experience with my Bissell vacuum cleaner. After cleaning the carpets, I noticed that it was spitting out dirt and debris.
At first, I thought it was just a minor issue with the vacuum filter, but later, I realized it was bigger than I thought.
After doing some research, I discovered that this is a common problem with Bissell vacuums and can be resolved by taking simple steps.
In this article, we will discuss why your Bissell vacuum is spitting out dust and how you can fix it yourself in no time.
Let’s get started!
Why is your Bissell vacuum spitting out dirt?
Bissell vacuums may be spitting out dirt due to a clogged filter or hose, an overly full dirt bin or the vacuum bag needs to be properly set.
You should check and clean the filter and hoses, empty the dirt bin, and make sure that all components are set correctly.
1. Full bag
If your vacuum cleaner is spitting out dirt, it’s mostly a chance that the dirtbag may be full and it does not have enough space. If you do not empty the bag, you can face problems with your vacuum, like low suction power or the vacuum spitting out dust.
You should check the bag after using the vacuum for about half an hour to ensure that the bag is not full. You must change the bag frequently to ensure the performance of your vacuum.
2. Dirty filters
A clogged or dirty filter can cause the vacuum to spit out dust and dirt. A dirty filter prevents air suction and dirt from being collected. It’s important to clean your vacuum, as a dirty filter will reduce suction power and cause the motor to work harder than necessary, leading to a faulty motor.
You must clean the filters to ensure the performance of your vacuum cleaner. For cleaning the filter, you will need to remove the filters from the machine before washing them in warm water.
After cleaning, reattach the filters to the vacuum cleaner. Ensure they are completely dry before you start vacuuming again, as any moisture in the filters could damage your machine.
3. Clogged vacuums head
If your vacuum cleaner is spitting out dust, it may be because of the clogged vacuum head. Dust, debris, or pet hair may clog the vacuum head. Clogged heads cause the vacuum to become inefficient and even start spitting out dirt instead of collecting it.
It’s important to inspect and clean the vacuum head regularly to ensure the performance of your vacuum cleaner. For cleaning the clogged head, first, unplug the machine and disassemble and remove any debris or buildup that you find in the hose or vacuum head.
It’s also a good idea to check for any signs of damage, such as cracks or wear in the plastic housing, which could contribute to blockages. After cleaning and inspecting the vacuum head, reassembled it securely before powering up the vacuum again.
4. Clogged suction hose
If your vacuum is spitting out dirt instead of sucking it in, it may be caused by a clogged suction hose. This means that objects and debris have become clogged in the hose, blocking the airflow and preventing effective cleaning.
Clogs, including hoses, filters, and ports, can form in almost any part of the vacuum’s suction system. If you’re facing the same issue, you should examine the vacuum hose for any visible obstructions, such as pet hair or large dirt or dust.
Once visible blockages are cleared away, you must clean out smaller debris. If the cleaning does not solve the issue, then changing the entire hose to a new one may solve the issue.
5. Damaged belt
If your vacuum spits out dirt, it’s often due to a damaged belt. The belt is a critical component of the vacuum. It helps the beater bar and roller brush rotate to pick up dirt and debris from carpets and hard floors.
If the belt becomes cracked or frayed, it can cause the vacuum to lose suction power, resulting in dirt being released back into the floor. You must replace the belt with a new one specifically designed for your vacuum model.
After replacing the belt, turn on the vacuum to see if it works.
6. Reverse the vacuums plug
Reversing the plug on your vacuum can be a simple and effective way to fix minor problems with your machine. Before attempting this, ensure the vacuum is unplugged from the wall outlet. Once unplugged, the vacuum, locate the plug and gently pull it out of the socket.
You may need a pair of needle nose pliers to loosen it. After you’ve pulled out the plug, inspect it for any signs of damage. If there is any visible wear or damage, consider replacing the plug before you continue reversing it.
Reverse the plug, and turn it over so that the prongs are flipped in opposite directions; if one prong was facing up previously. Now have it face down and vice versa. Once you’ve got both prongs flipped around, insert them back into the socket and firmly push until they are completely secure.
After ensuring that everything is securely fastened, reattach your vacuum to its power source and test whether or not your issue has been resolved.
7. Customer support
If you’re still facing a problem with your Bissell vacuum cleaner, you should contact Bissell customer support.
Customer support can provide other solutions or replace or repair this issue.
FAQ
How do I unclog my Bissell vacuum?
If you’re facing a problem with your monitor, you should need to unclog your vacuum.
Here are the steps to unclog the vacuum
1. At first, unplug your vacuum from the power source
2. Now remove the dirtbag from the vacuum and clear it from dust
3. Check the head of the vacuum for clogged debris
4. Remove the dust and dirt from the hose of the vacuum
5. Also, check the filter of your vacuum for debris
6. After removing all the debris reassemble the vacuum back
Why is my vacuum not suctioning?
Your vacuum might not be suctioning because of a few reasons, such as clogged filters or hoses, a broken belt or motor, or dirty brushes and rollers; it may also be caused by worn-out parts.
An electrical issue like a tripped breaker, blown a fuse, or debris blocking the airflow. Check each of these components and troubleshoot what is causing your vacuum to lack sufficient suction.
Why is my vacuum blowing out dust?
If your vacuum is blowing out dust, it might be due to a clogged air filter, a worn-out fan belt, or even broken parts. A clogged air filter can prevent airflow and cause the vacuum to blow dusty air back into the floor.
If the fan belt is loose or worn out, that could lead to low suction power and cause dust to get blown back into the floor. You should check and replace filters as needed and keep belts tight for optimal performance of your vacuum cleaner.
You may love to read!
Why Is My Vacuum Spitting Stuff Back Out
Shark Cordless Vacuum Keeps Spitting Out Debris
Wrapping Up
These are the possible solutions if your Bissell vacuum cleaner is spitting out dirt. You should try these solutions.
- Full bag
- Dirty filters
- Clogged vacuums head
- Clogged suction hose
- Damaged belt
- Reverse the vacuums plug
- Vacuum spray option
Sources:
