I recently purchased a Bissell carpet cleaner and was excited to try it. But when I used it, I noticed the water wasn’t spraying out of the machine.
At first, I thought there might be something wrong with my machine, but then after doing some research, I realized that this is quite common and can be fixed easily.
In this article, we will explore why your Bissell carpet cleaner is not spraining the after and how you can fix it.
Let’s get started!
Why does your Bissell carpet cleaner not spraying water?
If your Bissell carpet cleaner is not spraying water, it may be due to various reasons, such as a clogged hose or pump, blockage in the tank opening, blocked filter.
In order to fix this problem, you should inspect the hose and components for blockages and ensure that the filters are clean and debris-free.
1. Check water level
When troubleshooting your Bissell carpet cleaner not spraying water, the first step should be to check the water level.
Ensure the tank is filled with enough clean, cold tap water to operate properly. If it is not filled sufficiently, the machine may not spray out any water.
Also, if the tank is overfilled, it can cause an overflow and prevent proper suction from occurring.
In order to solve the issue, you should ensure that the water level in the tank is to allow the vacuum to work properly.
2. Clogged spray holes
Many users of Bissell carpet cleaners use a pump system to spray water onto the surface of carpets.
When these pumps become clogged with dirt, debris, or hair, they may stop working properly and not spray water.
In order to resolve the issue, you should unclog the spray holes, turn off the power and unplug it from the wall.
Then remove any visible debris from the pump and clear out any blockages preventing liquid from spraying properly.
Check all tubes for clogs and remove them with a pipe cleaner or brush. After cleaning the holes,
reassemble all parts of the carpet cleaner and plug it back in to test if the issue has been resolved.
3. The water tank may be empty
If the water tank becomes empty, the vacuum will not get the water and not be able to spray the water. You should check to see if the water tank is empty.
Also, ensure that the water tank may not have been filled correctly or run out of water during cleaning.
If the water tank is full, but the cleaner is still not spraying water, there may be an issue with the pump or hose connection.
Check both for any clogs or damage. If that doesn’t solve the problem, then it could be the result of a faulty motor or other mechanical issue.
4. Worn out tank
If your Bissell carpet cleaner is not spraying water, it may be due to a worn-out tank. It can be caused by prolonged use.
If the tank becomes cracked or damaged, it will prevent the tank from holding and spraying water properly.
You should check the water tank to ensure it is not worn out; if it is not, you should check the seals on the tank that may become compromised.
5. Ensure tank connection
Sometimes, the water tank may not properly connect to the vacuum, which can lead to water leakage and low suction.
You should ensure that the tank connection is secure and the tank is properly locked into place.
It would be best to inspect the handle release latch to ensure it is secure and in its original position.
Remove the tank and check for any blockages or damage to the release button.
6. Worn out belt
If the belt becomes worn out over time, it can lead to the problem of the machine not being able to spray water effectively.
You should inspect the belt for visible damage or cracks; if there are any cracks, you should replace the belt with a new one.
In order to replace the belt, you will need to locate the belt. It can usually be found behind the housing of the cleaner.
Once it has been located, then remove all components that are attached to it, including any screws or fasteners.
Now take a replacement belt for your model of Bissell carpet cleaner. Once you have a new belt, then install it into the cleaner by reassembling all of its components.
After replacing the belt, reassembling everything back together again.
7. Clogged filter
A clogged filter is a common reason if your carpet cleaner is not spraying water. You should check the filter for blockages and dust buildup, as this can impede the flow of water to the spray nozzle.
If there is any buildup in the filters, you should clean them. In order to clean the filter, turn off the vacuum and unplug it from the power source, then remove the filter located near the motor or water tank.
Then clean it with compressed air or an air blower to remove all dust and debris; after cleaning it, wash it with warm water and mild detergent.
Before reinserting it into the vacuum, you should ensure the filter becomes dry.
8. Customer support
If you still need any help, you should contact Bissell customer support for further instructions.
Customers can provide you with other solutions for it.
FAQ
How do I get my Bissell to spray water?
In order to get your Bissell to spray water, firstly, ensure it is filled with the proper mixture of warm water and cleaning solution.
Then turn the power switch on and press the trigger on the handle of your machine. Then it will start the spraying process.
If you need to increase or decrease the amount of water being sprayed, adjust the fingertip control knob until you reach your desired level of pressure.
Why is my Bissell carpet cleaner not giving water?
If your Bissell carpet cleaner is not giving water, there could be several potential causes.
You should check to ensure that the water tank of the cleaner has been filled correctly and that all connections and components are properly secured.
Also, make sure that the appropriate cleaning solution has been mixed into the water in order to allow it to come out of the machine’s nozzle.
If you’re still facing the issue, there may be a problem with the pump or motor that powers the machine.
Try troubleshooting this by checking for any blockages or loose connections in these parts, as well as verifying that they have sufficient power and voltage.
Why is my Bissell pet cleaner not spraying?
If your Bissell pet cleaner is not spraying, it could be caused by a few things, such as an empty water tank or a faulty motor.
In order to resolve the issue, you should ensure that the water tank is properly connected to the vacuum and that the tank is filled with water to the desired level.
Why is t my Bissell spot cleaner not spraying water?
The most likely cause of your Bissell spot cleaner not spraying water is a clogged spray nozzle.
You should check the nozzle for blockages caused by dirt or debris and ensure it is securely connected to the machine’s supply line.
If cleaning does not resolve the issue, you may need to replace the nozzle entirely.
You may also love to read!
Bissell Vacuum Power Button Stuck
Wrapping Up
These are the possible solutions if your Bissell carpet cleaner stops spraying water. You should try these solutions to fix the issue.
- Check water level
- Clogged spray holes
- The water tank may be empty
- Worn out tank
- Ensure tank connection
- Worn out belt
- Clogged filter
Now I’d like to hear from you!
Which method are you using from this article? Do you still need further information about Why your Bissell vacuum is not spraying water?
Let me know in the comment.
Sources:
