I was vacuuming my living room one day when I noticed that the brushes of my Bissell vacuum weren’t spinning.

It was strange because it had been working fine before, and nothing seemed to have changed.

I started to panic, wondering what could be wrong with it.

But instead of giving up hope, I decided to research why my Bissell vacuum brush is not spinning and how to fix it myself.

In this article, I will discuss why your vacuum brushes are not spinning and how you can fix it.

Let’s get started!

Why Does your Bissell vacuum brush not spin?

The belt connects the motor to the brush roll, and if it becomes damaged, the brush roll will not be able to rotate.

In order to solve the issue, you should check the belt to ensure it is not faulty, remove the housing of the vacuum and inspect for any signs of damage on the belt.

If your belt looks worn or has cracks in it, then you should need to replace it.

1. Clogged brush

The vacuum relies on a suction system to hold the brush in place and keep it rotating; any blockages can cause the brush to stop spinning properly.

You should regularly clean and maintain the vacuum’s brushes to ensure they are free from debris and can spin properly.

In order to clean the brushes, remove brushes from the vacuum by pressing down on either side of the black plastic bar holding them in place.

Now turn over and check for any obstructions in the bristles or slots where the bristles are attached.

If there is any debris, use a soft-bristled brush to gently dislodge it. Also, ensure that all slots are clear so air can pass freely when reattaching them later.

After cleaning the brushes, reattach them back into their place.

2. Improper setting

One of the possible causes for why your Bissell vacuum’s brush is not spinning could be improper floor setting.

If the correct setting is not selected, the cleaner will not be able to spin the brush correctly. 

That’s why the vacuum has different settings to work properly with different types of flooring.

For example, if a higher setting is chosen while cleaning carpets, it will be too powerful and may damage the carpet fibers.

In order to check what type of settings is used for various floor surfaces, check the instructions in your Bissell user manual or customer service for assistance.

Usually, some settings are labeled by the type of surface that should be used on, such as Carpet Mode or Hard Floor Mode.

3. Faulty brush roller

The brush roller is an important part of the vacuum that helps to clean carpets and other surfaces properly.

If the brush roller is not spinning as it should, it can cause the brush to not spin.

There are various causes for a faulty brush roller. The most common cause is a buildup of debris.

Which causes it to become clogged, preventing the roller from spinning as it should.

In order to ensure the brush roller, you should check to see if there is any blockage or buildup on the roller.

If there is any buildup, you should remove it with a soft brush or vacuum attachment; however, be sure not to force anything into the motor housing, as this could cause further damage.

If the brush roller still does not spin after clearing blockages and trying to manually rotate it, it may indicate an issue with the belt or motor.

4. The roller switch may off

Sometimes, a faulty roller brush switch may cause it. A switch is located at the base of the vacuum, activated when it senses that the vacuum cleaner is in use.

If the roller switch is not on, then it will not allow the motor to turn on, and no power to rotate the brushes.

You should ensure that the switch is turned on. If the switch isn’t working and does not move when pressed, you should replace it with a new one.

5. Damaged belt

The belt is responsible for rotating the brush roller; if worn out or damaged, it cannot rotate the brushes properly.

In order to solve the issue, you should inspect the belt to see if it is worn out or cracked in any way; if there is any damage or crack, you should replace it with a new one.

You should also check for any damage on the plastic pulleys; it could also cause the brushes to not rotate.

6. Faulty brush roller motor

The brush roller motor is responsible for powering the rotating brushes to agitate dirt and debris from the carpets.

When the motor becomes worn out or becomes damaged, then it will not be able to power the brush roller.

You should inspect the motor for visible damage or worn-out components; if there is any fault, you should repair them with a new one.

In order to avoid the same issue in the future, you should service at least once every 6 months to prevent any major dirt buildup.

If your vacuum has been serviced recently, but you are still experiencing an issue with your vacuum, then it may be a major issue.

7. Improper installation of brush

If the brush is not installed properly, it may cause the brushes to not spin properly. Usually, it may be due to a loose or slipping out-of-alignment belt.

If it becomes too loose, it may not be able to move the brushes fast enough to create better suction.

You should check the brushes to ensure that the brushes are installed properly. If they are not settled properly, you must remove the brushes. Then installed them back securely.

8. Clogged hose

A clogged hose can block the vacuum’s suction power and stop the brush from spinning.

In order to unclog a hose, turn off the power switch and disconnect it from any electrical outlets. Now check the hose for any obstruction.

If there is any debris, you should use needle nose pliers or tweezers to remove debris such as hair, dirt, dust, and small objects that may be stuck in the hose.

After removing all visible debris, attach an air compressor to one end of the hose and blow through it to dislodge any remaining material.

You can also use a stiff wire brush or other tools to clear blockages in hard-to-reach areas.

After removal of remaining debris, reattach the hose and test the vacuum to see if it works.

9. Clean out clogged components

Sometimes, the clogged components of the vacuum can also cause it. In order to clean out the clogged component of the vacuum.

Unplug the power cord from the outlet and then remove blockages from around the roller.

Use a soft brush to remove any dirt, hair, or lint that has built up around it. If necessary, use tweezers or pliers to remove debris.

Once all visible debris has been removed, check for remaining material that may be clogged inside the roller head.

You should also check if any of its components is damaged or worn; replace it to solve the issue.

10. Faulty main motor

The main motor is responsible for powering the vacuum brush, and if it malfunctions, it can create a loss of suction or cause the brush to stop spinning.

If you suspect that your vacuum has a faulty main motor, you should take a deep look to ensure it does not become worse.

Firstly, check if the main motor is receiving electricity properly. If there are any signs of wear and tear on its wires or connections, replace them immediately.

If it does not solve the issue, it is likely that the main motor needs to be replaced with a new one.

11. Customer support

If you still need help with your Bissell vacuum cleaner, you should contact Bisselll customer support for further instructions.

Customer support can provide you with other solutions for this issue. They have qualified technicians.


Why isn’t the brush on my Bissell vacuum spinning?

There are various reasons why the brush on your Bissell vacuum isn’t spinning. The most common cause may be an obstruction blocking the brush, such as dirt, fibers, or hair.

Another potential issue could be that the belt or roller has worn out and needs to be replaced. 

You should also check if the switch has been set to ‘OFF’ mode – this can sometimes happen if you move from one type of flooring to another.

How do I turn off my Bissell brush roll?

In order to turn off your Bissell brush roll, you should locate the power switch. This is usually located on the lower part of the machine and marked with a power symbol.

Push it to the ‘off’ position; it will cut off the power and stop the brush from spinning. Now ensure that your brush roll is turned off.

How do you clean a Bissell vacuum brush?

In order to clean a Bissell vacuum brush, Unplug the vacuum and switch off the vacuum. Then, remove the roller brush from the unit and use scissors or a knife to cut away debris.

Use a vacuum nozzle to suck away any loose dust particles. Finally, wipe down both sides of the roller with an old rag until it is completely free of dirt and debris. Reattach it back into its slot.

How often do you change a Bissell brush?

When it comes to changing a vacuum brush, a general recommendation is to change it every 3-6 months.

It will ensure that your vacuum cleaner is working at its optimal performance and that dirt or debris accumulated in the brush is cleared out.

You may also consider replacing your brush more often if you have pets or young children at home.

Can you wash a vacuum brush roll?

Yes, you can wash a vacuum brush roll. It depends on the type of vacuum you have; there are various methods for cleaning the brush roll.

If your vacuum has an easily removable brush roll, you can take it out and rinse it with warm water and mild soap.

But some vacuums have a built-in hair removal system that uses a motorized roller brush to remove tangled hair from the roller.

You can use this feature to carefully pick away hairs or debris that may be stuck in the bristles of the roller.

How long do vacuum brushes last?

The lifespan of a vacuum brush depends on the type and frequency of use. Generally, most standard brushes last between two and three years with regular cleaning.

If you’re using the vacuum frequently, it might be best to replace your brush yearly. But the brushes are likely to last longer as they are made of higher-end materials.

Why is my Bissell cross-wave brush not spinning?

If your Bissell Crosswave brush is not spinning, it could be due to various causes. The most common cause may be the malfunctioning motor.

A malfunctioning motor can be caused by a number of factors, including worn or damaged brushes, clogs in the motor chamber, or insufficient power to the unit.

A worn-out belt may cause the brushes to not spin. You should replace the belt with a new one to solve the issue.

You may love to read!

Prettycare Vacuum Brush Not Spinning

LG CordZero Brush Not Spinning

Dyson Brush Bar Not Spinning

Wrapping Up

These are the possible solutions if your Bissell vacuum is not turning on. You should try these solutions to fix the issue.

  • Clogged brush 
  • Improper setting 
  • Faulty brush roller 
  • The roller switch may off 
  • Damaged belt 
  • Faulty brush roller motor 
  • Improper installation of brush
  • Clogged hose 
  • Clean out clogged components 
  • Faulty main motor 

Now I’d like to hear from you!

Which method are you using from this article? Do you still need further information about the Bissell vacuum brush not spinning?

Let me know in the comment.


How to clean vacuum brush

How to replace a vacuum belt 

How to unclog a vacuum hose 

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *